---
title: Connect to the Internet
description: "The SpyderWash POS System requires an internet connection via Ethernet or Wi-Fi. To connect to Wi-Fi, follow the instructions below to access the Network Settings menu. Please note that the Home and Power buttons are located behind the Employee-Facing Display,…"
url: "https://spyderwash.info/help/pos-guide/"
updated: "2026-09-21"
category: POS Manual
---

# Connect to the Internet

The SpyderWash POS System requires an internet connection via Ethernet or Wi-Fi. To connect to Wi-Fi, follow the instructions below to access the Network Settings menu. Please note that the Home and Power buttons are located behind the Employee-Facing Display, near the Barcode Scanner.

![](https://spyderwash.info/wp-content/uploads/01-No-Internet-1024x576.jpeg)
**"No Internet Connection"** will appear if both
Wi-Fi **and** Ethernet are connected simultaneously!

![](https://spyderwash.info/wp-content/uploads/02-IMG_1418-1024x576.jpeg)
Press and hold the Home button, then
press the Power button.

![](https://spyderwash.info/wp-content/uploads/03-Elo-Screen-0-1024x576.jpeg)
Swipe up on the screen to access the
Device Control Panel.

![](https://spyderwash.info/wp-content/uploads/04-Elo-Screen-1-1024x576.jpeg)
Enter the password: **1elo**

![](https://spyderwash.info/wp-content/uploads/05-Elo-Screen-2-1024x576.jpeg)
Tap the hamburger menu (three horizontal
lines) in the upper-right corner.

![](https://spyderwash.info/wp-content/uploads/06-Elo-Screen-3-1024x576.jpeg)
Press and hold the Wi-Fi symbol.

![](https://spyderwash.info/wp-content/uploads/07-Elo-Screen-4-1024x576.jpeg)
Select "Internet" then choose your Wi-Fi
network from the list.